在對移動式升降機http://www.jntr168.com/進行檢修的過程中，發現線路是接通的，但設備卻不能正常的工作。這中情況大多數了可以斷定是移動式升降機電氣系統虛電故障，也就是空載測量時電壓正常而加載后就會出現失壓的現象，下面濟南天銳升降機械的專家給大家詳細分析一下移動式升降機如何應對虛電故障？

1、移動式升降機虛電故障產生大多是由線路接觸不良而引起的。為避免該類故障，一方面需要對移動式升降機電氣系統部件進行定期檢查，包括電氣元器件的密封防水部位是否被損壞；暴露在外界空氣中的電氣連接部分是否生銹腐蝕；電線的接頭是否松動等。
Most of the virtual electrical faults in the mobile elevator are caused by poor line contact. To avoid this kind of failure, on the one hand, need to carry out regular inspection of the mobile elevator electrical system components,including electrical components of the waterproof sealing parts is damaged; exposure in the ambient air in electrical connection part of the rust corrosion; wire connector is loose. 

2、對于惡劣工況下的移動式升降機http://www.jntr168.com/要定期清理，方式灰塵進入元件內部。最后還要對移動式升降機接觸器、斷路器等開關元器件的觸點經常維護保養，以使元件觸電接觸面保持平整。
For the bad conditions of the mobile lift to be cleaned regularly, the way the dust into the internal components. In the end, the contact of the switch elements, such as the mobile elevator contactor, the circuit breaker and the like, is always maintained, so that the contact surface of the element is kept smooth.